|
|
|
|
 |
|
|
|
|
|
Specifications |
| Tube Complement | Four stages of gain using two, low noise 12AX7A/7025 tubes |
| Inputs | Front
panel: one 1/4" phone jack, high impedance (1 meg Ohm) wide range input. Rear panel: one 1/4" phone jack (same impedance as front panel input) |
| Tube Voicings | Tube
distortion Tube clean Solid state |
| EQ | Bass:
+/- 16 dB center 180Hz Mid: +/- 12 dB center 600 Hz Treble: +/- 16 dB center 1.6 kHz Presence: +/- 12 dB center 3 kHz |
| Chorus | Depth 0 (none) to 100, LFO Rate 0.1 second to 10 seconds |
| Effect loop | Send:
Single ended 1/4" phone jack variable from instrument to line level.
Max drive on the send line is +19 dbV. Return: Single ended 1/4" phone jack. Max signal level is + 30 dBV. Level: provides 20 dB of boost or cut to the send/receive signals, interfaces with low level and line level effects. |
| Outputs | Complementary stereo outputs. Two single ended 1/4" phone jacks. |
| Headphone Out | Stereo 1/4" phone jack.Drives headphones of 600 Ohms or more. |
| Level | Provides full mute to +17 dB above internal signal level. Max output +12 dB. |
| MIDI | Channel
1-16, Omni (all), Midi OFF Program Change: External 0-127, Internal 1-128, Midi mapping. |
| Power | 120 VAC, 50/60 Hz. Power consumption: 12 watts |
| Dimensions | D=10.5", W=19", H=1.75" (1 rack space) |
| Weight | 6 lbs., 8 lbs. shipping |
| Options | 220 VAC, 50/60 Hz |
